Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 113)

D-10
Command Line Interface
Controller Details
The controller details attributes are defined as follows:
■ Controller Name —Name
■ Controller Type —Product name
■ Controller Availability —Access mode
■ Controller Remote Computer —Name of the remote computer
on which an open controller resides
■ Controller Serial Number —Last six hexadecimal characters of
the serial number
■ Controller CPU Type —CPU
■ Number of Channels —Number of channels
■ Number of Devices Per Channel —Maximum number of
devices, not including the host controller
■ Controller CPU Speed —Clock speed (in MHz)
■ Controller Memory —Total amount of available memory for
applications and data
Example
AAC0> controller details
Executing: controller details
Controller Information
----------------------
Remote Computer: .
Device Name: AAC0
Controller Type: Adaptec xxxxxx
Access Mode: READ-WRITE
Controller Serial Number: Last Six Digits = 8A277A
Number of Buses: 2
Devices per Bus: 15
Controller CPU: i960
Controller CPU Speed: 100 Mhz
Controller Memory: 64 Mbytes
Battery State: Not Present
Component Revisions
----------------------
CLI: 3.0-0 (Build #5478)
API: 3.0-0 (Build #5478)
Miniport Driver: 3.0-0 (Build #5478)
Controller Software: 3.0-0 (Build #5478)
Controller BIOS: 3.0-0 (Build #5478)
Controller Firmware: (Build #5478)
Controller Hardware: 3.3