Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 49)

3-13
Installing the Driver
To modify the startup.ncf file:
1 At the server console prompt, type load nwconfig and press
Enter
.
2 Select the NCF File Options menu, then press Enter.
3 Select the Modify Startup.ncf option, then press Enter.
4 Make the necessary changes. When you are done, press Esc.
Note: You can also use your DOS text editor to modify the
startup.ncf file, it resides on the DOS partition.
For additional information on the startup.ncf file, refer to your
NetWare documentation.