Adaptec SATA AND SCSI RAID CONTROLLERS - Manual (Page 63)

A-1
A
Adaptec RAID
Configuration Utility (ARC)
In this Appendix...
Overview
The Adaptec RAID Configuration (ARC) utility is part of the
controller BIOS. The utility includes:
■ Array Configuration Utility (ACU) —Used to create, configure,
and manage arrays, and make arrays bootable. Also used to
initialize and rescan drives. (Also available as a stand-alone
DOS utility as described in
Appendix B, ACU for DOS .)
■ SATASelect and SCSISelect —Used to change device and
controller settings.
■ Disk Utilities —Used to format or verify media.
To run the ARC utility, press Ctrl+A when prompted by the
following message during system startup:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
Overview A-1
Using the ACU A-2
Using SATASelect and SCSISelect A-9
Using the Disk Utilities A-15
Viewing the Event Log A-16