HP NonStop G-Series - Manual (Page 38)

Installing and Configuring the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
2 -8
Setting the SCSI ID
6. With the cursor n ext to line 3, press Enter. The cursor moves to line 4, the up
arrow appears at the end of line 1, and th e down arrow appears at the end of
line 4. On line 4, scroll to display more options. Scroll so that line 5 appears.
Then press Enter to save the new selection. An * appears at the left of line 5
to indicate that it is the current selection.
7. Press Escape repeatedly until the menu in Figure 2-4 reappears.
8. Repeat Steps 1 through 7 for each configuration option that you need to
change.
Figure 2-7. Set SCSI Menu Scrolled