HP NonStop G-Series - Manual (Page 65)

Operating the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
4- 21
Map Information Screen
When you press Enter the screen shown in Figure 4-13 appears.
An underlined cursor appears under the first digit. To set the first digit, press the
" or # scroll button until the desired code number appears. To move the cursor
to the second digit, press Enter. Repeat the process for each of the four digits.
Remember to copy the 4-digit number. You will need it to enter the Menu mode.
An unlock code of 0000 disables control panel locking.
Figure 4-13. Code Select Menu