Figure 5-3, Maintenance menu – HP NonStop G-Series User Manual
Page 86
Maintaining the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
5 -4
Running From the Front Panel
3. Press Enter once to select Clean Drive. The screen in
4. Line 2 is not scrollable. Press Enter once to accept LTO1. The
cursor
moves
to line 4 of the display. Press Enter again to use the cleaning cartridge in
Slot 1.
5. The Cleaning Confirmation Screen will appear.
6. To execute the cleaning operation, press Enter. If the confirmation screen
does not show the intended drive and cleaning cartridge, press Escape to
return to the Cleaning menu. When you press Enter, Cleaning In Progress
will appear on the display.
7. When the cleaning operation is finished, the Default screen reappears.
Figure 5-3. Maintenance Menu