HP NonStop G-Series - Manual (Page 77)

Operating the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
4- 33
Loading and Unloading Tape Cartridges
•
The * at the left of line 2 disappears. The default selection has been scrolled
off screen, and an item from the list has not yet been selected. The *
indicates the current selection or the default selection.
Suppose you want to unload the tape cartridge that is in LTO 1 to Slot 1 in the
magazine. Scroll to LTO1 and the display shown in
Figure 4-23 appears.
Initial Screen - From Line
The list on line 2 includes the tape drive and every tape magazine slot that has a cartridge in it.
You cannot select a tape cartridge from a slot or tape drive that is empty.
Initial Screen - To Line
The list on line 4 includes all the valid destination choices; that is, all slots that are empty. A
tape cartridge cannot be placed in a slot or tape drive that already contains one. If the tape
drive is empty, it appears on this list.
Scroll List - To Line
There is another limitation on the To list. If the tape drive has been selected on the From
screen, the To list can include only slots. If a slot has been selected on the From screen, the To
list can contain only the tape drive.
Figure 4-23. Load/Unload From Entry Screen