Assembling an ultrascsi raid subsystem – HP Array Controller HSG V8.7 Software User Manual
Page 178
Assembling an UltraSCSI RAID Subsystem
B–6 UltraSCSI RAID Enclosure
Table B–1 describes the mechanical procedures for installing array
controllers and cache modules. Following installation, configure the
subsystem using procedures contained in the following publications:
•
Array controller documentation
•
Operating system-specific release notes
Note
For single array controller and cache set configurations,
Controller A must be configured with Cache A or
Controller B must be configured with Cache B.
Table B–1 Installing Array Controllers and Cache
Modules
1.
Align the array controller
with the Controller A slot
(C
ALLOUT
3) in the
enclosure.
17
11
CXO5813B
19 20
21 22 23 24
13 14
15 16
18
7
8
9
10
12
1
2
3
4
5
6
A
B
4A
3A
2A
1A
3B
2B
1B
4B
Shelf 4
Shelf 3
Shelf 2
Shelf 1
1
2
3
Controller A
Cache A
4