HP Array Controller HSG V8.7 Software User Manual

Page 2

Advertising
background image

September 1998

While Compaq Computer Corporation believes the information included in
this publication is correct as of the date of publication, it is subject to change
without notice. Compaq makes no representations that the interconnection of
its products in the manner described in this document will not infringe on
existing or future patent rights, nor do the descriptions contained in this
document imply the granting of licenses to make, use, or sell equipment or
software in accordance with the description. Possession, use, or copying of the
software described in this documentation is authorized only pursuant to a valid
written license from Compaq, an authorized sublicensor, or the identified
licensor.

Compaq, DIGITAL, and the Compaq logo Registered in U.S. Patent and
Trademark Office.

CI, DSSI, and StorageWorks are trademarks of Compaq Computer
Corporation.

PROCOMM PLUS is a registered trademark of Data Storm Technologies, Inc.

© 1997, 1998 Compaq Computer Corporation. All rights reserved.

This equipment generates, uses, and may emit radio frequency energy. The
equipment has been type tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC rules, which are
designed to provide reasonable protection against such radio frequency
interference.

Operation of this equipment in a residential area may cause interference in
which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.

Any modifications to this device—unless expressly approved by the
manufacturer—can void the user’s authority to operate this equipment under
part 15 of the FCC rules.

Note

Additional information on the need to interconnect the device
with shielded (data) cables or the need for special devices, such as
ferrite beads on cables, is required if such means of interference
suppression was used in the qualification test for the device. This
information will vary from device to device and needs to be
obtained from the EMC group or product manager.

Advertising