HP Array Controller HSG V8.7 Software - Manual (Page 24)

Introducing the UltraSCSI RAID Enclosure
1–2 UltraSCSI RAID Enclosure
This enclosure cannot function until:
1. It is installed in an UltraSCSI data center cabinet (DS–SW600
series) or an UltraSCSI departmental server cabinet
(DS–SWXRE series).
2. 3.5-inch StorageWorks building block (SBB) disk drives are
installed.
3. A compatible array controller is installed and connected to a
host computer or adapter.
4. The enclosure and the subsystem are configured for UltraSCSI
operation.
Note
The “DS–” model number prefix defines new Compaq
storage products. In some cases, these numbers might be
similar to an existing product number. For example, the
DS–BA35X–HE ac input box (also known as the ac
power controller) and the BA35X–HE ac input box have
similar model numbers but are not interchangeable.
Installing incompatible products in a StorageWorks
subsystem could result in degraded operation or
noncompliance with country-specific certifications.
See Figure 1–2 for the Compaq-supported enclosure applications.