HP Array Controller HSG V8.7 Software - Manual (Page 141)

Power Distribution
UltraSCSI RAID Enclosure 6–15
9. Press the two mounting
tabs together to release
the power supply from
the shelf. Using both
hands, pull the power
supply out of the shelf.
10. Place the power supply into an electrostatic bag.
11. Lay the power supply on its side on a flat surface.
Table 6–4 Installing a Power Supply
1. Check the bezel label to verify that the power
supply being installed is a 180 W power supply.
2. Lay the power supply on its side on a flat surface.
Table 6–3 Removing a Power Supply (Continued)
CXO-4314A-MC
CXO5926A