HP XP P9500 Storage - Manual (Page 116)

•
CT group list (numeric): To maintain interchangeability with the script made with the model
before XP12000 Disk Array/XP10000 Disk Array, this parameter has been left. Do not use
this parameter with P9500.
•
SEQCHK flag list (string): To maintain interchangeability with the script made with the model
before XP12000 Disk Array/XP10000 Disk Array, this parameter has been left. Do not use
this parameter with P9500.
The example below shows the SelectHrcDevice command to find the pairs with the parameters
listed in
Table 54 (page 116) .
Table 54 Select device parameters
Value Parameter
_ilDevA Output list
_ilDevB Device list
_slWorkA RCU serial number
_ilWorkA RCU SSID
N Fence level
Synchronous0 Copy mode
Suspended Pair status
M Device attribute
Example 13 SelectHrcDevice command
Start $Script="HRC",$Svr="64002"
// $Dev
SetList $D =_ilDevB, $S =
{0x000F00,0x000F01,0x000F02,0x000F03,0x000F04,0x000F05,0x000F06,
0x000F07}
AddList $D =_ilDevB, $S =
{0x000F10,0x000F11,0x000F12,0x000F13,0x000F14,0x000F15,0x000F16,
0x000F17}
AddList $D =_ilDevB, $S =
{0x000F20,0x000F21,0x000F22,0x000F23,0x000F24,0x000F25,0x000F26,
0x000F27}
AddList $D =_ilDevB, $S =
{0x000F30,0x000F31,0x000F32,0x000F33,0x000F34,0x000F35,0x000F36,
0x000F37}AddList $D =_ilDevB, $S =
{0x000F40,0x000F41,0x000F42,0x000F43,0x000F44,0x000F45,0x000F46,
0x000F47}
AddList $D =_ilDevB, $S =
{0x000F50,0x000F51,0x000F52,0x000F53,0x000F54,0x000F55,0x000F56,
0x000F57}
SelectHrcDevice $DevList = _ilDevA, $Dev = _ilDevB,
$Sync = "Synchronous0", $PairStatus = "Suspend"
DeleteHrcPair $Dev = _ilDevA
End
Internal macro commands
The internal macro commands are the connection agents that allow you to connect the functional
macros together and produce a complete and functioning script. The internal macros are divided
into two groups as shown in
Table 55 (page 117) , list types and non-list types.
116 Continuous Access Synchronous Z scripting