Add rcu dialog box – HP XP P9500 Storage User Manual
Page 143
Description
Item
Date and time when the RCU was last updated.
Last Update Time
Support for the CGROUP (FREEZE/ RUN) PPRC TSO command.
FREEZE Option
The time limit for data to travel from M-VOL to R-VOL.
Round Trip Time
To refresh the RCU Operation window after closing the RCU Status dialog box, click the
check box. By default, the check box is not selected.
Check box, "Refresh the
RCU Operation window
after this dialog box is
closed":
Add RCU dialog box
This dialog box lets you link two storage systems for creating Continuous Access Synchronous Z
pairs. See
“Configure disk arrays and define logical paths” (page 46)
for complete information.
Description
Item
Remote system’s CU serial number.
RCU S/N
Remote system’s LDKC number.
LDKC
Remote system’s controller ID.
Controller ID
Remote system’s CU number.
Logical Adr. (RCU CU)
Remote system’s SSID.
SSID
Path from the ports on the local and remote systems.
MCU-RCU Path
Add RCU dialog box
143