HP XP P9500 Storage - Manual (Page 140)

RCU Operations list when “MCU&RCU” selected
List field descriptions when MCU&RCU is selected in the Display box are shown below. The fields
vary according to the selections you make in the tree:
•
“When LDKC, a CU group, or CU is selected in tree” (page 140)
•
“When an MCU or RCU is selected in tree” (page 141)
When LDKC, a CU group, or CU is selected in tree
The following columns are displayed in the list area when MCU&RCU is selected in Display, and
an LDKC, CU group, or CU is selected in the tree.
Description Column
CU number selected on the tree. CU
Displays whether the paired system is an MCU or RCU. This depends on whether the system
and CU you accessed in Remote Web Console is a main or remote system. For example, if Type
you accessed a main system (MCU), then Type will show RCU, a remote system, and vice
versa.
Serial number of the paired CU (five digits). The LDKC number (two digits) displays next to
the S/N. S/N
The SSID is displayed in a four-digit hexadecimal number. SSID
CU number of the paired CU. Paired CU
Path channel type (fibre) between the CU in the local system and paired CU. This column is
blank when the local CU is an MCU. M-R Path
Status • Normal indicates no path failure to the RCU.
•
Failed indicates a failure in all paths to the RCUs.
•
Warning indicates that a failed path to the RCU exists.
• The field is empty when the local CU is an MCU.
Number of paths (blank when the connected CU is an MCU). Num. of Path
140 Continuous Access Synchronous Z GUI reference