Rcu option dialog box, Add path dialog box, Rcu option dialog box add path dialog box – HP XP P9500 Storage User Manual
Page 144
RCU Option dialog box
This dialog box lets you change data path parameters: the minimum number of paths, RIO MIH,
FREEZE Option, and Round Trip Time options.
See the procedure
“Configure disk arrays and define logical paths” (page 46)
for complete
information.
Description
Item
Where minimum number of paths is defined.
Minimum Paths
Where the time is defined in which the copy operation must complete, otherwise the operation
fails. Options are 10 to 100 seconds.
RIO MIH Time (sec.)
Where to define that the support for the CGROUP (FREEZE/ RUN) PPRC TSO command is
enable or disable.
FREEZE Option
Where the time limit is defined for data to travel from the M-VOL to the R-VOL.
Round Trip Time (ms)
Add Path dialog box
144 Continuous Access Synchronous Z GUI reference