HP SAN Virtualization Services Platform - Manual (Page 28)

See also
“ Enable insecure command ” on page 32
“ Show security command ” on page 66
Disable ntp
command
Disables use of the ntp protocol on the DPM.
Syntax
disable ntp
See also
“ Enable ntp command ” on page 33
“ Modify ntp command ” on page 41
“ Restart ntp command ” on page 48
“ Show ntp command ” on page 63
Disable port
command
Disables the specified Fibre Channel port number so that it cannot send and receive Fibre Channel
traffic.
Syntax
disable port
[port number]
*
Keyword values
[port number]
Port number is an integer 0–15 to indicate the DPM Fibre Channel port to be disabled.
* indicates all Fibre Channel ports.
See also
“ Enable port command ” on page 33
“ Modify port command ” on page 42
“ Modify ports command ” on page 43
“ Show port command ” on page 63
“ Show ports command ” on page 64
CLI commands 28