Show voltage command, Show voltages command, Shutdown command – HP SAN Virtualization Services Platform User Manual
Page 70: Version command, 70 show voltages command, 70 shutdown command, 70 version command
Show voltage
command
Returns the nominal and actual voltages for the DPM. The nominal voltage is the expected voltage
when everything is operating correctly. The actual voltage is the current voltage.
Syntax
show voltage
[voltage number]
*
Keyword values
voltage number
An integer between 1 and 15 inclusive, that is the location in the DPM circuitry where the voltage is
measured. Used by support personnel as a diagnostic tool.
* indicates all voltages in the DPM.
See also
Show voltages
command
Returns the nominal and actual voltages for the DPM. The nominal voltage is the expected voltage
when everything is operating correctly. The actual voltage is the current voltage.
Syntax
show voltages
See also
Shutdown
command
Powers off the DPM.
Syntax
shutdown
Version
command
Returns the DPM version.
CLI commands
70