HP SAN Virtualization Services Platform - Manual (Page 41)

Notes
If you are connected through the management port, modifying the MGMT Ethernet terminates any
active network GUI and CLI sessions, requiring a re-login through the serial or MGMT port. If you are
using the CLI on the serial console, the connection is not disrupted.
See also
“ Disable eth command ” on page 26
“ Enable eth command ” on page 31
“ Set eth command ” on page 51
“ Show eth command ” on page 58
“ Show eths command ” on page 58
Modify factory
command
Restore the factory rank or the factory WWNN value.
Syntax
modify factory rank [rank-value]
modify factory wwnn [wwnn-value]
Keyword values
At least one of the optional keywords is required:
[rank-value]
New rank value (Primary or Secondary).
[wwnn-value]
New WWNN to set.
See also
“ Load factory command ” on page 38
“ Show factory command ” on page 59
Modify ntp
command
Change the NTP server.
Syntax
modify ntp server [server-name]
Keyword values
[server-name]
New server to be used to get the time.
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 41