HP SAN Virtualization Services Platform - Manual (Page 52)

[interface name]
Ethernet interface that you are changing: MGMT, GE1, GE2, or GE3.
link [auto]
Auto negotiate duplex and link speed
link [duplex <duplex value>]
Full or half
link [speed <link speed>]
10, 100, or 1000.
family
IPv4, IPv6
method
Address resolution method—auto or manual
See also
“ Disable eth command ” on page 26
“ Enable eth command ” on page 31
“ Modify eth command ” on page 40
“ Show eth command ” on page 58
“ Show eths command ” on page 58
Show bootset
command
Displays the platform, version, status, checksum, and active status of the bootset specified.
Syntax
show bootset [number]
Keyword values
[number]
Number of the bootset (1 or 2).
See also
“ Enable bootset command ” on page 31
“ Show bootsets command ” on page 52
Show bootsets
command
Displays the platform, version, status, checksum, and active status of all the bootsets.
CLI commands 52