HP SAN Virtualization Services Platform - Manual (Page 31)

See also
“ Create user command ” on page 23
“ Delete user command ” on page 26
“ Enable user command ” on page 35
“ Modify user command ” on page 46
“ Show user command ” on page 68
“ Show users command ” on page 69
Enable bootset
command
Set the active bootset.
Syntax
enable bootset [number]
Keyword values
[number]
The number 1 or 2.
Notes
Since there are only two bootsets, enabling one bootset effectively disables the other. Therefore, there
is no “disable bootset” command.
See also
“ Show bootset command ” on page 52
“ Show bootsets command ” on page 52
Enable eth
command
The DPM includes four Ethernet interfaces: MGMT, GE1, GE2, and GE3. This command enables the
specific Ethernet interface so that it can send or receive network traffic.
Syntax
enable eth [interface name]
Keyword values
[interface name]
Name of the Ethernet interface that you are enabling: MGMT, GE1, GE2, or GE3.
See also
“ Disable eth command ” on page 26
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 31