HP SAN Virtualization Services Platform - Manual (Page 35)

Enable syslog
command
Begins logging to the specified remote logging server. The remote server must have been added with
the add syslog command.
Syntax
enable syslog [host]
Keyword values
[host]
Host name of the remote logging server.
See also
“ Add syslog command ” on page 21
“ Add syslog command ” on page 25
“ Disable syslog command ” on page 30
“ Show syslog command ” on page 67
Enable telnet
command
Enables use of the telnet application to connect to the DPM CLI.
Syntax
enable telnet
See also
“ Disable telnet command ” on page 30
“ Show telnet command ” on page 67
Enable user
command
Enables the user account that was previously disabled using the Disable user command.
Syntax
enable user [user name]
Keyword values
[user name]
Name of the user account that you are enabling.
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 35