HP SAN Virtualization Services Platform - Manual (Page 76)

Logging into the DPM Management GUI
1. From a web browser, log in with the username and password, using the same web browser from
which the WebStart application was installed.
User name: admin
Password: password
Figure 5 DPM Management GUI Login screen
2. Click Login.
3. HP recommends that you change the password if you did not already do so during setup:
• If you are using the DPM Management GUI, change the password on the telnet screen. See
“ Telnet ” on page 85 for more information.
• If you are using the CLI, run the Modify User command to change the password.
Navigating the DPM Management GUI
Navigation begins for the DPM Management GUI with the Chassis panel on the System icon. The
Chassis panel provides property information for the Data Path Module.
Using the Data Path Module management GUI 76