HP SAN Virtualization Services Platform - Manual (Page 49)

See also
“ Disable ntp command ” on page 28
“ Enable ntp command ” on page 33
“ Modify ntp command ” on page 41
“ Show ntp command ” on page 63
Restart snmp
command
Stops and then restarts the Simple Network Management Protocol.
Syntax
restart snmp
See also
“ Create snmp command ” on page 23
“ Delete snmp command ” on page 25
“ Disable snmp command ” on page 29
“ Enable snmp command ” on page 34
“ Modify snmp command ” on page 44
“ Show snmp command ” on page 66
Restart ssh
command
Stops and then restarts the ssh service.
Syntax
restart ssh
See also
“ Disable ssh command ” on page 29
“ Enable ssh command ” on page 34
“ Show ssh command ” on page 66
Save config
command
Saves a configuration file.
Syntax
save config [name]
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 49