Show ps command, Show pss command, Show rport command – HP SAN Virtualization Services Platform User Manual
Page 65: 65 show pss command, 65 show rport command
Show ps
command
Returns the status (Error or OK) and voltage information for the specified power supply. The DPM
arrives with two power supplies already installed.
Syntax
show ps
[power supply number]
*
Keyword values
[power supply number]
1 or 2.
* indicates both power supplies.
Notes
When looking at the fan side of the DPM, power supply 1 is on the right side, and power supply 2
is on the left side.
See also
Show pss
command
Returns the status (Error or OK) and voltage information for each of the two power supplies on the
DPM.
Syntax
show pss
Notes
When looking at the fan side of the DPM, power supply 1 is on the right side, and power supply 2
is on the left side.
See also
Show rport
command
Displays information for all ports matching the partial value of the WWPN specified.
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide
65