HP SAN Virtualization Services Platform - Manual (Page 33)

Enable ntp
command
Enables use of the ntp protocol on the DPM.
Syntax
enable ntp
See also
“ Disable ntp command ” on page 28
“ Modify ntp command ” on page 41
“ Restart ntp command ” on page 48
“ Show ntp command ” on page 63
Enable port
command
Enables the specified Fibre Channel port number so that it can send and receive Fibre Channel traffic.
Syntax
enable port
[port number]
*
Keyword values
port number
Port number is an integer 0–15 to indicate the DPM Fibre Channel port to be enabled.
* indicates all Fibre Channel ports.
See also
“ Disable port command ” on page 28
“ Modify ports command ” on page 43
“ Modify ports command ” on page 43
“ Show port command ” on page 63
“ Show ports command ” on page 64
Enable secure
command
Enables permissions on SSL-encrypted transmissions.
Syntax
enable secure [permission]
HP StorageWorks SAN Virtualization Services Platform Data Path Module user guide 33