HP Color LaserJet CP6015 Printer series - Manual (Page 114)

Configure a tray by using the Paper Handling menu
You can also configure the trays for type and size without a prompt from the product.
1. Press Menu .
2. Press the down arrow to highlight PAPER HANDLING, and then press the checkmark button
.
3. Press the down arrow to highlight the size or type setting for the desired tray, and then press the
checkmark button
.
4. Press the up arrow or the down arrow to highlight the size or type. If you select a custom size,
select the unit of measure, and then use the numeric keypad to set the X dimension and the Y
dimension.
5. Press the checkmark button to save your selection.
6. Press the back arrow .
7. Press the back arrow again.
Automatic media type sensing (auto sense mode)
The automatic media type sensor functions only when that tray is configured to ANY TYPE. Configuring
a tray to any other type, such as Bond or Glossy, deactivates the media sensor in that tray.
The HP Color LaserJet CP6015 Series printers can automatically classify many paper types into one of
the following categories:
● Plain
● Transparency
● Glossy
● Glossy film (tough paper)
● Heavy
For more control, a specific type must be selected in the job or configured in a tray.
Auto-sense settings
Full sensing (available only for tray 1)
● The product recognizes plain and heavy paper, transparencies, glossy paper, and tough paper.
● Each time the product begins a print job, it stops the every page to sense the type.
● This is the slowest mode.
Expanded sensing (default) (available for all trays)
● The product recognizes plain and heavy paper, transparencies, glossy paper, and tough paper.
● Each time the product begins a print job, it stops the first page to sense the type.
100 Chapter 7 Paper and print media ENWW