HP Color LaserJet CP6015 Printer series - Manual (Page 193)

Control-panel message types
Four types of control-panel messages can indicate the status of or problems with the product.
Message type Description
Status messages Status messages reflect the current state of the product. They inform you of normal product operation
and require no interaction to clear them. They change as the state of the product changes. Whenever
the product is ready, not busy, and has no pending warning messages, the status message
READY appears if the product is online.
Warning messages Warning messages inform you of data and print errors. These messages typically alternate with the
READY or status messages and remain until you press the checkmark button
. Some warning
messages are clearable. If CLEARABLE WARNINGS is set to JOB, the next print job clears these
messages.
Error messages Error messages communicate that some action must be performed, such as adding paper or clearing
a jam.
Some error messages are auto-continuable. If AUTO CONTINUE is set on the menus, the product
will continue normal operation after an auto-continuable error message appears for 10 seconds.
NOTE: Pressing any button during the 10-second auto-continuable error message overrides the
AUTO CONTINUE setting, and a button function takes precedence. For example, pressing the
Stop button pauses printing with an option to cancel the print job.
Critical-error messages Critical error messages inform you of a product failure. Some of these messages can be cleared by
turning the product off and then on. These messages are not affected by the AUTO CONTINUE
setting. If a critical error persists, service is required.
ENWW Control-panel message types 179