HP Color LaserJet CP6015 Printer series - Manual (Page 46)

Item Sub-item Values Description
CAUTION: Using an Override
option may result in unsatisfactory
print quality and unavailability of
certain features (such as toner
remaining information).
CAUTION: All print defects or
supply failures incurred when an
HP supply is used in Override
mode are not considered defects in
materials or workmanship under
the HP Print Cartridge and Image
Drum Limited Warranty Statement.
For Warranty information, see
Print
cartridge and image drum limited
warranty statement on page 261
.
The Override options can be
enabled or disabled at any time
and do not have to be re-enabled
for each color supply. The product
automatically continues printing
when a color supply reaches its
recommended replacement point.
The message, “Replace supply
Override in use,” displays on the
control panel while a color supply
is used in Override mode. When
the color supply is replaced with a
new one, Override mode is de-
activated until another color supply
reaches its recommended
replacement point.
OVERRIDE AT OUT 1 allows
printing to continue when a color
supply is out, but displays a
warning. Printing stops if there is a
risk of damage to product
components.
OVERRIDE AT OUT 2 allows
printing to continue when the color
supply is out, but displays a
warning message. Printing is not
stopped even if there is a risk of
damage to product components.
SUPPLY INFORMATION PAGES REMAINING
ORDER MESSAGES
LEVEL GAUGE
ON
OFF
ORDER AT RANGE=0-100% The user can set the supply
percentage remaining at which the
ORDER AT message appears.
The default is 5%.
COLOR SUPPLY OUT STOP
AUTOCONTINUE BLACK
Sets the COLOR SUPPLY OUT
product behavior when a color
supply is empty. When the product
is set to AUTOCONTINUE
BLACK , the product continues
32 Chapter 2 Control panel ENWW