HP Color LaserJet CP6015 Printer series - Manual (Page 169)

The product uses four colors and has a different image drums for each color: black (K), magenta (M),
cyan (C), and yellow (Y).
Replace an image drum when the control panel displays REPLACE <COLOR> DRUM message. The
control-panel display also indicates the color that should be replaced (if a genuine HP cartridge is
currently installed). Replacement instructions are included in the image drum box.
NOTE: If toner gets on clothing, wipe it off with a dry cloth and wash the clothes in cold water. Hot
water sets toner into fabric.
NOTE: Information about recycling used image drums is on the image drum box.
Replace image drums
1. Grasp the grips on the sides of the front door and pull down to open.
2. With one hand, lift and slowly pull the used image drum out of the product, while supporting the
image drum with your other hand.
NOTE: If reusing the same image drum, do not touch the green cylinder on the bottom of the
drum because it can damage the drum.
3. Store the used image drum in a protective bag. Information about recycling used image drums is
on the image drum box.
4. Remove additional image drums in the same manner.
ENWW Replace supplies 155