HP Color LaserJet CP6015 Printer series - Manual (Page 206)

Control panel message Description Recommended action
Moving solenoid and motor
To exit press STOP
The solenoid and a motor are moving as part
of a component test. No action is necessary.
No stored jobs Displayed when the user enters the
RETRIEVE JOB menu and there are no jobs
to retrieve. No action is necessary.
NON HP SUPPLY IN USE
For help press (Help button)
A non HP supply is in use. A user authorized the use of non HP supplies
when the HP supply was replaced. Any
product repair required as a result of using
non HP supplies is not covered under
warranty. Certain features may not be
accurate or available.
Non-HP supply installed A refilled color or a cloned color/mono
cartridge has been installed, and the product
previously used all genuine HP supplies. It
can also appear when an unauthorized
cartridge has been installed, and the product
previously used all genuine supplies. Install a genuine HP cartridge, or press the
checkmark button
to override the
condition.
OPEN AND CLOSE TRAY 2
For help press (Help button)
The transfer unit has not been detensioned
after shipping. Open and close Tray 2.
ORDER <COLOR> CARTRIDGE The identified print cartridge is nearing the
end of its useful life.
Printing will continue until a supply needs to
be replaced.
Order a replacement print cartridge.
ORDER <COLOR> CARTRIDGE LESS
THAN XXXX PAGES The identified cartridge is nearing the end of
its useful life. The product is ready and will
continue for the estimated number of pages
indicated. Estimated pages remaining is
based upon the historical page coverage of
this product. Order a replacement cartridge. Printing can
continue until the cartridge must be replaced
ORDER <COLOR> DRUM The identified drum is nearing the end of its
useful life.
Printing will continue until a supply needs to
be replaced.
Order a replacement drum.
ORDER <COLOR> DRUM LESS THAN
XXXX PAGES The identified drum is nearing the end of its
useful life. The product is ready and will
continue for the estimated number of pages
indicated. Estimated pages remaining is
based upon the historical page coverage of
this product. Order a replacement drum. Printing can
continue until the drum must be replaced.
ORDER FUSER KIT LESS THAN XXX
PAGES
For help press
The fuser is near end of life. The product is
ready and will continue for the estimated
number of pages indicated. Printing will
continue until a supply needs to be replaced. Order a replacement fuser kit.
ORDER ROLLER KIT LESS THAN XXX
PAGES The identified roller kit is nearing the end of
its useful life. The product is ready and will
continue for the estimated number of pages
indicated. Estimated pages remaining is
based upon the historical page coverage of
this product. Order a replacement roller kit.
Table 12-1 Control-panel messages (continued)
192 Chapter 12 Solve problems ENWW