Resume dialog box – HP XP P9500 Storage User Manual
Page 167
Description
Item
Specify how to deal with update data that has not been copied to the S-VOL. The default is
Flush:
Suspend Mode
•
Flush: When you split the pair, update data is copied to the S-VOL.
When the secondary storage system receives a request for splitting a pair, all the journal
data (that is, update data) that the pair retains is written to the S-VOL. After that, the status
of the pair changes from Suspending to Suspend if the pair does not retain any journal
data for a certain period of time.
•
Purge: When you split the pair, update data is not copied to the S-VOL. If you restore the
pair later, the update data is copied to the S-VOL.
Applies the settings to the Preview list in the Pair Operation window.
Set
Discards the settings and closes the dialog box.
Cancel
Resume dialog box
Use this dialog box to resynchronize a pair.
See
for complete information.
Description
Item
Specify the restore range. The default is Volume if two or more pairs in the same mirror are
selected. The default is Mirror if not. Note that the default setting is Mirror when the pair status
is Hold, Holding or Hlde, and in that case you cannot change the default setting.
Range
•
Volume: Only the specified pair(s) is restored.
•
Mirror: All pairs in the same mirror(s) as the selected pair(s) is restored.
If the following two conditions are satisfied and you click Apply, a warning message appears
and processing cannot be continued:
The Preview list contains two or more pairs belonging to the same mirror.
The Range column shows Mirror for at least one of the above pairs.
To be able to continue processing, do either of the following:
Ensure that the Range column shows Volume for all pairs in the same mirror.
In the Preview list, select one pair in one mirror, and then other pairs in the mirror is
excluded.
Specify the desired priority (1-256) (scheduling order) for the pair-restoring operations. If Range
is Mirror, you cannot change the Priority option.
Priority
Indicates the followings about a remote storage system.
DKC
•
The serial number with the LDKC number.
•
The controller ID with the model name.
•
The path type.
Pair Operation window
167