HP XP P9500 Storage User Manual

Page 171

Advertising
background image

•

Close the DKC Status window.

•

Click File > Refresh on the menu bar.

•

Select Modify mode when you are in View mode.

Use the DKC Operation window to:

•

“Configure storage systems for Continuous Access Journal Z, define logical paths ” (page 57)

•

“Configure additional logical paths ” (page 59)

•

View one of the following:

“Remote Systems Information ” (page 172)

◦

◦

“Logical Path Information” (page 173)

◦

“Port Information for the local system” (page 173)

NOTE:

DKC is an acronym for disk controller, which controls an entire storage system. Cnt Ac-J

Z windows use the term "DKC" to indicate a storage system.
LDKC is an acronym for logical disk controller, and it also may be called logical DKC. LDKC is a
controller that controls a logical storage system that exists in P9500. In the Cnt Ac-J Z window, the
term “LDKC” indicates a logical storage system.

Description

Item

Changes information in the DKC Operation window.

Display

•

DKC shows information about the remote storage systems and the logical paths.

•

Port shows information about ports on the local storage system.

Shows either of the following, depending on the selection in Display.

Tree

•

Remote storage systems.

•

Channel adapters on the local storage system and port attributes.

Shows information about one of the following, depending on what is selected in Display and
Tree:

Operation

•

Remote storage systems. See

“Remote Systems Information ” (page 172)

.

•

Logical paths. See

“Logical Path Information” (page 173)

.

•

Ports on the local storage system. See

“Port Information for the local system” (page 173)

.

DKC Operation window

171

Advertising