HP XP P9500 Storage - Manual (Page 59)

11. The Minimum Paths box is intended for a future release. Continue to the next step.
12. RIO MIH means “remote I/O missing interrupt handler.”
In the RIO MIH Time box, enter the amount of time to wait before the data transfer operation
is flagged as failed by the system. The range of time is from 10 seconds to 100 seconds (15
seconds is the default).
When using a 3DC cascading configuration, it recommended that RIO MIH is set at 20
seconds.
13. Click Set and display the DKC Operation window.
14. See the Preview list to check the settings that you have made.
•
If you want to modify a setting, select and right click the setting in the Preview list and
then select Modify.
•
If you want to cancel a setting, select and right click the setting and then select Cancel.
15. Click Apply to apply the settings. If an error occurs, the error code appears in the rightmost
column of the Preview list. To view detailed information about the error, right click the error
code and select Error Detail.
Configure additional logical paths
You can configure additional logical paths as needed. A maximum of eight logical paths are
supported.
Prerequisite information
Please review the prerequisites for configuring logical paths in “Configure storage systems for
Continuous Access Journal Z, define logical paths ” (page 57) .
To configure additional logical paths
1. In Remote Web Console, select Actions > Remote Copy > Continuous Access Journal Z > DKC
Operation.
2. Click to change the mode from View to Modify.
3. In the Display box, select DKC. The tree and full list on the right-side display information about
remote storage systems.
4. In the tree, select the remote system below the associated LDKC. The logical paths display in
the full right-side list.
5. Right-click a logical path and select Add Path from the menu.
Configure additional logical paths 59