HP XP P9500 Storage - Manual (Page 182)

•
If a failure occurred with two or more pairs at the same time, the number of pairs showing
Suspend Pair(Failure) or Ready for Delta resync(Failure) may not match the actual number of
pairs in which the failure occurs.
•
The copy time might not be shown in the Copy Time column, even though Add Pair Complete
or Resume Pair Complete is shown in the Operation column. In such case, you can review the
copy time in the volume list in the Pair Operation window
Export operations history
Use the History window Export function to save operation history to a CSV file.
The following is an example of an exported text file.
2007/02/22 09:57:54,Paircreate Complete,01,01,00:02:01,00:02:04,--,000:01:08
2007/02/22 09:56:46,Paircreate Start,01,01,00:02:01,00:02:04,--,
2007/02/22 09:56:46,Pair definition,01,01,00:02:01,00:02:04,--,
(1) (2) (3) (4) (5) (6) (7) (8)
(1) Data and time when the operation finished.
(2) Operation.
(3) Journal number
(4) Mirror ID
(5) LDKC number, CU number and LDEV number of the volume in the local storage system (LDKC : CU : LDEV).
(6) LDKC number, CU number and LDEV number of the volume in the remote storage system (LDKC : CU : LDEV).
(7) Extended consistency group number (used only with Continuous Access Journal Z). If no EXCTG, hyphens (--) display.
(8) Time taken for copying (from the start to the end of copying). Time is provided only when the operation (see (2))
is Paircreate Complete or Pairresync Complete
Optional Operation window
This window lets you change the number of volumes on which the initial copy operation is performed
concurrently.
Information on the Optional Operation window will be updated when you do one of the following:
•
Click Apply.
•
Select another tab and then reselect the Optional Operation tab.
•
Click File > Refresh on the menu bar.
•
Select Modify mode when you are in View mode.
182 Continuous Access Journal Z GUI reference