HP EML E-series Tape Libraries User Manual
Page 132
table assembly
A component of the robotics unit that carries the picker assembly vertically
among the library modules.
tape cartridge
A container holding magnetic tape that can be processed without separating
the tape from the container. The library uses data and cleaning cartridges.
These cartridges are not interchangeable.
tape drive
An electromechanical device that moves magnetic tape and includes
mechanisms for writing and reading data to and from the tape.
tape drive assem-
bly
An interface to control/monitor tape drive operation.
U
A measure of chassis height. 1U in rack measurement is 44.45 mm (1.75
inches).
Circuit card assemblies using the cPCI standard use the Eurocard range of
circuit card sizes, where 3U cards are 100 x 160 mm (3.94 x 6.3 inches) and
6U cards are 230 x 160 mm (9.187 x 6.3 inches). The HP StorageWorks
Interface Manager card is considered 4U wide with dimensions of 161.9 x
157.3 mm (6.4 x 6.2 inches).
World Wide
Name (WWN)
A 64-bit integer that identifies a Fibre Channel port.
wrist
A component of the hand assembly that rotates the hand horizontally.
132
Glossary