Print fax confirmation reports, Print fax error reports – HP Officejet J5740 All-in-One Printer User Manual

Page 114

Advertising
background image

This section contains the following topics:

Print fax confirmation reports

Print fax error reports

Print the fax log

Print other reports

Print fax confirmation reports

If you need printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either On Fax
Send
or Send & Receive.
The default fax confirmation setting is Off. This means that the HP All-in-One will not print
a confirmation report for each fax sent or received. A confirmation message indicating
whether a fax was successfully sent appears briefly on the display after each transaction.

To enable fax confirmation from the control panel

1.

Press Setup.

2.

Press 2, and then press 3.
This selects Print Report and then selects Fax Confirmation.

3.

Press to select one of the following, and then press OK.

Off

Does not print a fax confirmation report when you send and receive
faxes successfully. This is the default setting.

On Fax Send

Prints a fax confirmation report for every fax you send.

On Fax Receive

Prints a fax confirmation report for every fax you receive.

Send & Receive

Prints a fax confirmation report for every fax you send and receive.

TIP:

If you choose On Fax Send or Send & Receive, and scan your fax to send

from memory, you can include an image of the first page of the fax on the Fax
Sent Confirmation
report. Press Setup, press 2, and then press 2 again.
Select On from the Image on Fax Send Report menu.

Print fax error reports

You can configure the HP All-in-One so that it automatically prints a report when there is
an error during transmission or reception.

To set the HP All-in-One to print fax error reports automatically

1.

Press Setup.

2.

Press 2, and then press 3.
This selects Print Report and then selects Fax Error Report.

3.

Press to select one of the following, and then press OK.

Send & Receive

Prints whenever there is any kind of fax error. This is the default setting.

Off

Does not print any fax error reports.

Chapter 9

112

Use the fax features

Advertising