Print from your computer, Print from a software application, Change the print settings – HP Officejet J5740 All-in-One Printer User Manual
Page 73: Mac users, 6 print from your computer, 6print from your computer
6
Print from your computer
The HP All-in-One can be used with any software application that allows printing. You
can print a range of projects, such as borderless images, newsletters, greeting cards,
iron-on transfers, and posters.
This section contains the following topics:
•
Print from a software application
•
•
Print from a software application
Most print settings are automatically handled by the software application. You need to
change the settings manually only when you change print quality, print on specific types
of paper or transparency film, or use special features.
To print from a software application
1.
Make sure you have paper loaded in the input tray.
2.
From the File menu in your software application, choose Page Setup.
The Page Setup dialog box appears, allowing you to specify the paper size,
orientation, and scaling.
3.
Make sure the HP All-in-One is the selected printer.
4.
Specify the page attributes:
•
Choose the paper size.
•
Select the orientation.
•
Enter the scaling percentage.
5.
Click OK.
6.
From the File menu in your software application, choose Print.
The Print dialog box appears, and the Copies & Pages panel opens.
7.
Change the print settings for each option in the pop-up menu, as appropriate for your
project.
NOTE:
When printing a photo, you must select options for the correct paper type
and photo enhancement.
8.
Click Print to begin printing.
Change the print settings
You can customize the print settings of the HP All-in-One to handle nearly any print task.
•
Mac users
Use the Page Setup and Print dialog boxes to change the settings for your print job.
Which dialog box you use depends on which setting you want to change.
Print from your computer
71