HP Officejet J5740 All-in-One Printer - Manual (Page 80)

3. Press Start Copy Black or Start Copy Color.
The HP All-in-One makes a 10 x 15 cm (4 x 6 inch) borderless copy of your original
photo.
NOTE: If you loaded tabbed paper in the photo tray, you can remove the tab
from the copy of your photo once the ink has completely dried.
TIP: If the output is not borderless set the paper type to Premium Photo, and
then try making the copy again.
To make a borderless copy of a photo from the HP Photosmart Studio (Mac)
Software
1. Load 10 x 15 cm (4 x 6 inch) photo paper into the photo tray.
TIP: When making borderless copies, you must have photo paper (or other
specialty paper) loaded.
2. Load your original print side down on the right front corner of the glass.
3. In the HP Photosmart Studio (Mac) task bar, click Devices.
The HP Device Manager window appears.
4. Select the HP Device Manager from the Dock.
The HP Device Manager window appears.
5. Click Make Copies.
6. In the Tasks area, double-click Make Copies.
The HP Copy dialog box appears.
7. From the Paper Size pop-up menu, choose the 10 x 15 cm (4 x 6 inch) paper size
option.
8. From the Paper Type pop-up menu, choose the type of photo paper you loaded in
the input tray.
Chapter 7
78 Use the copy features