HP Officejet J5740 All-in-One Printer User Manual
Page 177
Advertising
Remove the stack of paper from the input tray, and then reload the paper following
the steps below.
To load full-size paper
1.
Remove the output tray.
2.
Slide the paper-width guide to its outermost position.
3.
Tap a stack of paper on a flat surface to align the edges, and then check the paper
for the following:
•
Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
•
Make sure all the paper in the stack is the same size and type.
Print troubleshooting
175
Advertising