HP Officejet J5740 All-in-One Printer - Manual (Page 236)

Solution: Adjust the lightness and darkness of the copies.
To adjust the copy contrast from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass or print
side up in the document feeder tray.
If you use the document feeder tray, place the pages so that the top edge of the
document goes in first.
3. In the Copy area, press Menu repeatedly until Lighter / Darker appears.
4. Do one of the following:
•
Press to darken the copy.
• Press to lighten the copy.
5. Press Start Copy Black or Start Copy Color.
Cause: Try using Enhancements improve an overexposed image.
Solution:
To copy an overexposed photo
1. Make sure you have paper loaded in the input tray.
2. Load your original photo print side down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3. In the Copy area, press Menu repeatedly until Enhancements appears.
4. Press until the Photo enhancement setting appears.
5. Press Start Copy Color.
Nothing happens when I try to copy
Cause: The HP All-in-One is turned off.
Solution: Look on the HP All-in-One control panel to see if the display is blank, and
the Power button is not lit. If these two conditions exist, the HP All-in-One is turned
off. Make sure the power cord is connected and plugged into a power outlet. Press
the Power button to turn on the HP All-in-One.
Cause: The original is placed incorrectly on the glass or in the document feeder
tray.
Chapter 11
234 Troubleshooting