HP Hitachi Dynamic Link Manager Software - Manual (Page 180)

Distribution Mount point
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6 /media/cdrom
SUSE LINUX Enterprise Server /media/cdrom
If the DVD-ROM is automatically mounted:
/media/ media-volume-id
#
Note 1
HDLM cannot be installed if the DVD-ROM is mounted to a mount
point other than the above.
Note 2
To copy the DVD-ROM to a directory, and then install HDLM from that
directory, copy the DVD-ROM to a directory with the same name as
the mount point noted above. If the file permissions or the directory
structure differs, HDLM cannot be installed.
#
This refers to the volume name for the CD-ROM or other media,
formatted for ISO-9660 file systems. Use the volname command to
check media-volume-id.
The following shows an execution example for when media-volume-id
is VOL01234.
# volname /dev/cdrom
VOL01234
#
4
.
Check the version of HDLM.
Execute installux.sh or the HDLM installation utility (installhdlm)
stored on the HDLM DVD-ROM to check the version of HDLM that will be
installed.
The following example shows how to execute the command when the
mount point for the DVD-ROM is /media/cdrom:
¢
When executing installux.sh
# /media/cdrom/installux.sh -v
¢
When executing the installhdlm utility
# /media/cdrom/HDLM_Linux/installhdlm -v
A command execution example is described below. x.x.x-xx is the version
of HDLM.
KAPL09177-I HDLM version: x.x.x-xx
3-108
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Linux ®