HP Hitachi Dynamic Link Manager Software - Manual (Page 554)

Message ID Message Text Explanation
None.
KAPL05020-I Processing of IOCTL(aa...aa) will
now start.
Details
An IOCTL request was received.
aa...aa: IOCTL code (hexadecimal
number)
Action
None.
KAPL05021-I Processing of IOCTL(aa...aa)
completed normally.
Details
The processing for the requested
IOCTL operation was successful.
aa...aa: IOCTL code (hexadecimal
number)
Action
None.
KAPL05023-E Could not process the
IOCTL(aa...aa). (bb...bb:cc...cc)
Check the message of the HDLM
command or the HDLM
manager, and then take the
appropriate action. If you do not
know the appropriate action,
execute the DLMgetras utility to
collect error information, and
then contact your vendor or
maintenance company. Refer to
the HDLM User's Guide for
instructions how to execute the
DLMgetras utility.
Details
An attempt to process the
requested IOCTL call has failed.
aa...aa: IOCTL code (hexadecimal
number)
bb...bb: Error code (hexadecimal
number)
cc...cc: Thread ID of the process
that issued the I/O
Action
Check the following. After the
check, if the problem is not
solved, execute the DLMgetras
utility for collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM,
and then report the error and
detail code. For details on the
DLMgetras utility, see
DLMgetras
Utility for Collecting HDLM Error
Information on page 7-3 .
a
.
Make sure that the command
is executed by a user with
root permission.
b
.
The memory size is
insufficient. Stop the
unnecessary process.
c
.
Make sure that the IOCTL is
not issued to the device
management file (/dev/dlm/
sddlmfdrv0).
To check whether the error will
have any effect on the application,
8-42
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®