HP Hitachi Dynamic Link Manager Software - Manual (Page 532)

Message ID Message Text Explanation
KAPL01112-E An attempt to connect to the
HDLM driver has failed.
Operation name = aa...aa
Details
HDLM driver information must be
collected to execute the given
HDLM command, but the HDLM
driver cannot be accessed.
aa...aa: clear, offline, online,
set, or view
Action
If you did not perform HDLM
configuration, Perform HDLM
configuration.
When performing neither of the
above, or if the same error
continues to occur even after one
of the above procedures is
performed, execute the utility for
collecting HDLM error information
(DLMgetras) to collect the error
information, and then contact
your HDLM vendor or
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3 .
KAPL01113-E The HDLM file is invalid. File
name = aa...aa
Details
A file necessary for processing
HDLM cannot be found.
Alternatively, the content of a file
is invalid.
aa...aa: Name of file where error
was detected.
Action
Reinstall an HDLM.
KAPL01114-W The audit log configuration file
does not exist. Restart the
HDLM Manager, and execute the
"dlnkmgr view -sys -audlog"
command and check the setting.
Details
The audit log configuration file
does not exist.
Action
Restart the HDLM Manager, and
execute the dlnkmgr view -sys
-audlog command, and then
specify the desired setting by
using the dlnkmgr set -audlog
command or the dlnkmgr set -
audfac command as necessary.
KAPL01115-W The audit log configuration file
cannot be opened. Execute the
"dlnkmgr view -sys -audlog"
Details
The audit log configuration file
cannot be opened.
8-20
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®