View (displays information), Format, View (displays information) -30 – HP Hitachi Dynamic Link Manager Software User Manual
Page 424: Format -30, To display program information -30, To display path information -30, View (displays, Operation, see, View, The execution result of this operation
TraceLevel { 0 | 1 | 2 | 3 | 4 } (Default Value 0)
TraceFileSize { 100 - 16000 }(KB) (Default Value
1000)
Number-Of-TraceFiles { 2 - 64 }(Files) (Default Value 4)
Interval-Time { 1 - 1440 }(Minute) (Default Value 30)
(pchk)
Interval-Time { 1 - 1440 }(Minute) (Default Value 1)
(afb)
Error-Monitor-Interval { 1 - 1440 }(Minute) (Default Value 30)
Number-Of-Times { 1 - 99 }(Times) (Default Value 3)
AudlogLevel { 0 - 7 } (Default Value 6)
Category-Value { [ss] [a] [ca] |
all } (Default Value
all)
Facility-Name { user |
local0 - local7 } (Default Value
user)
Facility-Number { 1 | 16 - 23 } (Default Value 1)
Number-Of-PathUseTimes { 0 - 999999 }(Times) (Default Value 32)
Number-Of-ExPathUseTimes { 0 - 999999 }(Times) (Default Value
100)
AutoPATH_ID { 000000 - 999999 }(Decimal)
Dpc-Interval { 1 - 1440 }(Minute) (Default Value 10)
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
#
view (Displays Information)
The dlnkmgr command's view operation displays HDLM program information,
path information, LU information, and corresponding information about an
HDLM device, SCSI device, and LDEV.
Format
To Display Program Information
/opt/DynamicLinkManager/bin/dlnkmgr view -sys
[-sfunc|-msrv|-adrv|-pdrv|-lic|-audlog|-lbpathusetimes|-
expathusetimes]
[-t]
To Display Path Information
To display path information
/opt/DynamicLinkManager/bin/dlnkmgr view -path
[-hdev host-device-name]
[-stname]
[-iem]
[-srt {pn|lu|cp}]
[-hbaportwwn]
6-30
Command Reference
Hitachi Dynamic Link Manager User Guide for Linux
®