HP Hitachi Dynamic Link Manager Software - Manual (Page 632)

Message ID Message Text Explanation
Collecting HDLM Error Information
on page 7-3 .
KAPL12327-E An invalid entry is
registered in the file. File
name = aa...aa
Details
aa...aa: The name of the file containing
the invalid entry
Action
For dracut command:
Take the following actions
depending on the file name output,
and then reexecute the dracut
command.
In the case of /etc/lvm/lvm.conf
file
Edit the following lines as
described in Settings for Using a
Logical Volume (LVM2) on an
HDLM Device as a Boot Disk on
page 3-155 or Upgrade
Installation in an Environment
Where a Logical Volume (LVM2)
on an HDLM Device Is Used as a
Boot Disk on page 3-166 :
- filter
- types
- md_component_detection
For dlmmkinitrd:
Take the following actions
depending on the file name output,
and then re-execute the
dlmmkinitrd utility.
In the case of /etc/lvm/lvm.conf
file
Edit the following lines as
described in Settings for Using a
Logical Volume (LVM2) on an
HDLM Device as a Boot Disk on
page 3-155 or Upgrade
Installation in an Environment
Where a Logical Volume (LVM2)
on an HDLM Device Is Used as a
Boot Disk on page 3-166 :
- filter
- types
- md_component_detection
In the case of /etc/opt/
DynamicLinkManager/
dlmmkinitrd.conf file
8-120
Messages
Hitachi Dynamic Link Manager User Guide for Linux ®