HP Hitachi Dynamic Link Manager Software User Manual
Page 271
When you use the parted command to change the partition, to let the
system recognize the partitions on the HDLM device, execute the
blockdev command after the parted command.
3
.
Edit the /etc/lvm/lvm.conf file.
Edit the device section in the file as shown below to disable the SCSI
device configuration and enable the HDLM device configuration:
¢
Adding and deleting filter entry information
Add the following line and comment out all other filter entry
information:
filter = [ "a|sddlm[a-p][a-p].*|", "r|/dev/sd|" ]
¢
Adding types entry information
Add the following line:
types = [ "sddlmfdrv", 16 ]
Make sure that types=[ "fd", 16 ] was commented out.
Below is an example of editing the file when the OS is SUSE LINUX
Enterprise Server 11. The shaded section shows the portion to be edited.
Creating an HDLM Environment
3-199
Hitachi Dynamic Link Manager User Guide for Linux
®