HP Hitachi Dynamic Link Manager Software - Manual (Page 325)

linear
#default=HDLM_194.EL
default=linux
image=/boot/vmlinuz-2.6.18-194.el5
label=HDLM_194.EL
initrd=/boot/initrd-hdlm-2.6.18-194.el5.gz
read-only
append="option ramdisk_size=18245 option"
image=/boot/vmlinuz-2.6.18-194.el5
label=linux
initrd=/boot/initrd-2.6.18-194.el5
read-only
append="option"
root=/dev/sda2
¢
When the boot loader is GRUB
Example 1 below shows an example of editing the /etc/grub.conf
file (the underlined sections).
Example 2 below shows an example of editing the /boot/grub/
menu.lst file when a kernel supporting Xen in SUSE LINUX Enterprise
Server 10 is used (the underlined sections).
Make sure that the value specified in default is correct. You can
delete the configuration for specifying the HDLM device without
causing any problems.
Example 1: Example of Editing /etc/grub.conf file
#default=0
default=1
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
title Red Hat Enterprise Linux (HDLM-194.EL)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro option
ramdisk_size=18245 option
initrd /initrd-hdlm-2.6.18-194.el5.gz
title Red Hat Enterprise Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro root=/dev/sda2 option
initrd /initrd-2.6.18-194.el5
Example 2: Example of Editing /boot/grub/menu.lst file (When
using a kernel that supports Xen on SUSE LINUX Enterprise Server
10)
#default 0
default 1
timeout 8
gfxmenu (hd0,1)/boot/message
title XEN-hdlm
root (hd0,1)
Creating an HDLM Environment
3-253
Hitachi Dynamic Link Manager User Guide for Linux ®