Dlmsetopt utility for setting hdlm driver options, Format, Parameters – HP Hitachi Dynamic Link Manager Software User Manual

Page 497: Format -37, Parameters -37, Dlmsetopt utility for setting hdlm driver, For details on this utility, see, Utility, see

Advertising
background image

dlmsetopt Utility for Setting HDLM Driver Options

This utility changes the settings for the HDLM filter driver. Restart the host

machine to apply the changed settings. Note that you do not need to restart

the host machine every time you execute the dlmsetopt utility. If you

execute the dlmsetopt utility more than once, restart the host after you have

finished specifying all settings. Restarting the host enables all the changed

settings.

Format

/opt/DynamicLinkManager/bin/dlmsetopt {-r retrycount | -inqt

InquiryTimeout | -inqr InquiryRetry | -prsup ReserveStatus| -h}

Parameters

-r

Specify the number of retries when memory is allocated in the filter

driver. This memory is allocated for processing I/O requests from users. If

memory allocation fails, the system retries at intervals of 0.05 seconds. If

retrying for a long time results in I/O not being executed, set an

appropriate retry count. If that retry count is exceeded and memory

allocation fails, the KAPL05708-E message is output to syslog and to the

HDLM manager log file.

retrycount

Specify a numeric value from -1 to 2,147,483,646.
-1 : The system retries until memory is allocated. This is the initial

value of the system.
0 : The system does not retry.
1 to 2,147,483,646: The system retries the specified number of

times.
If the following values are specified, the message KAPL12559-E is

displayed and then the processing terminates:

Non-numeric value

Value less than -1

Value more than 2,147,483,646

-inqt

Specify, in seconds, the timeout value of the SCSI INQUIRY command. In

HDLM, the default timeout value is 30 seconds. Note that the timeout

value specified by using the -inqt parameter only applies to the SCSI
INQUIRY command executed from HDLM. This value has no effect on the
SCSI INQUIRY command executed from another application.

InquiryTimeout

Specify a numeric value of -1 or in the range from 1 to 3,600.
-1: This sets the timeout value to 30 seconds, which is HDLM's default

value.

Utility Reference

7-37

Hitachi Dynamic Link Manager User Guide for Linux

®

Advertising
This manual is related to the following products: