HP Hitachi Dynamic Link Manager Software - Manual (Page 345)

3
.
Update the kernel package or apply the OS update package.
4
.
Execute the dlmupdatesysinit utility for updating system scripts.
For details about this utility, see
dlmupdatesysinit Utility for Updating
System Scripts on page 7-41 .
5
.
Restart the host.
6
.
Specify the settings required for using an HDLM device as a boot disk.
Perform step 17 to 32 in
Upgrade Installation in an Environment Where
an HDLM Device Is Used as a Boot Disk on page 3-147 .
When you are using a logical volume (LVM2) on the HDLM device as a boot disk
To update a kernel package or apply an OS update package when a
logical volume (LVM2) on an HDLM device is used as the boot disk:
1
.
Perform the procedure in Preparations for an Upgrade Installation or Re-
installation of HDLM on page 3-105 .
2
.
Edit the configuration file by changing the OS startup definition so that
the OS will start with a SCSI device specified.
Perform step 1 to 20 in
Upgrade Installation in an Environment Where a
Logical Volume (LVM2) on an HDLM Device Is Used as a Boot Disk on
page 3-166 .
3
.
Update the kernel package or apply the OS update package.
4
.
Execute the dlmupdatesysinit utility for updating system scripts.
For details about this utility, see
dlmupdatesysinit Utility for Updating
System Scripts on page 7-41 .
5
.
Restart the host.
6
.
Specify the settings required for using an HDLM device as a boot disk.
Perform step 22 to 38 in
Upgrade Installation in an Environment Where a
Logical Volume (LVM2) on an HDLM Device Is Used as a Boot Disk on
page 3-166 .
HDLM Operations Using Commands
This section explains how to use the HDLM command. For details on the
various command operations, see Chapter 6, Command Reference on page
6-1 .
Notes on Using Commands
• Execute the command as a user with root permissions.
• To specify a parameter value containing one or more spaces, enclose the
entire value in double quotation marks (").
HDLM Operation
4-13
Hitachi Dynamic Link Manager User Guide for Linux ®