HP Hitachi Dynamic Link Manager Software - Manual (Page 404)

The following example shows how to filter and display the information on
all paths that pass through the HBA port whose host port number is 0004
and bus number is 0000:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep 0004.0000
The above command will display information on all the paths that pass
through the specified HBA port.
Example 2
The following example shows how to filter and display the information on
all the paths that pass through the CHA port 0A of the Thunder 9500V
series:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname | grep
9500V | grep 0A
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
online (Places Paths Online)
The dlnkmgr command's online operation places offline paths online. Specify
the paths to be placed online by specifying an HBA port, CHA port, or single
path. Instead of specifying a path, you can also specify a SCSI device name.
Format
To place paths Online
/opt/DynamicLinkManager/bin/dlnkmgr online
[-path]
[-hba host-port-number.bus-number
|-cha -pathid AutoPATH_ID
|-pathid AutoPATH_ID
|-device SCSI-device-name
|-hapath [-lu -pathid AutoPATH_ID]
|-dfha [-lu -pathid AutoPATH_ID]]
[-s]
To Display the Format of the Online Operation
/opt/DynamicLinkManager/bin/dlnkmgr online -help
6-10
Command Reference
Hitachi Dynamic Link Manager User Guide for Linux ®